1911 Recoil Spring pack VAR
4.25" 1911 Recoil Springs Kit 5-Pack 16lb, 17lb, 18lb, 18lb Progressive, 20lb
100 Item Items
Warning: Last items in stock!
1911 Commander .45ACP
16 lb., 17 lb., 18lb., 18 lb. Progressive, 20lb. RECOIL SPRINGS
BHSpringSolutions Use Recommendations:
16 lb - 9mm / .38Super Standard Pressure Ammo & light .45ACP Reloads
17 lb. - 9mm and .38Super +P Ammunition
18 lb. - .45ACP Standard Pressure Ammunition
18 lb. Progressive - .45ACP Standard Pressure Ammunition
20 lb. - .45ACP +P Ammunition
The .45ACP cartridge was originally invented to achieve optimal ballistics from a 5" barrel 1911. Shortening the barrel for the same size ammunition always presents certain challenges - primarily, controlling the same amount of energy and recoil with less Recoil Spring, since the Recoil Spring must become dimensionally shorter when the barrel is shortened. Shorter life of the Recoil Spring is a predictable by-product of this compromise. Users of the 1911 Commander .45ACP / 4.25" Barrel should embrace replacing the Recoil Spring at intervals not exceeding 3 years or 3,000 rounds fired.
All 1911s are not created equal. Nobody seems to know how many firearms manufacturers have built a 1911 semi-auto pistol. And even though springs may be interchangeable between most of them, not all 1911s function best with the same recoil and main spring combinations.
The design of the 1911 is so excellent, and so robust, that many 1911s continue to function, even after all the springs have become weak. This is both a blessing and a curse – because although the 1911 may seem to function fine with unhealthy springs – accuracy will suffer and rearward slide velocity will become excessive, causing premature wear of parts. In addition to causing your 1911 to wear out faster, weakened springs make great “riding partners” for a host of potential 1911 malfunctions, including: Encountering ammunition with “hard primers” (failures-to-fire) goes hand in hand with an unhealthy main spring that no longer causes the hammer to strike the firing pin with sufficient force. Experiences of failures-to-feed go hand in hand with a weakened recoil spring that no longer returns the slide to battery with sufficient authority.
Variations in .45ACP ammunition, exist today, that did not exist in 1911. The varieties of bullet weights and pressures in ammunition today constitute a moving target.
All coil springs in the 1911 are compressed, when installed. They are expending energy (wearing themselves out) just by being installed in a 1911.
You accept that it is solely your responsibility to assure that any firearm you may own, possess, handle or work on, is completely unloaded and handled in a safe and responsible manner at all times and that you hold harmless BHSpringSolutions LLC, its employees and officers, from any and all liability resulting from use of firearms.
You acknowledge that it is your responsibility to assure that your firearm(s) are functioning in a safe and reliable manner and that if not, whether you have installed a BHSpringSolutions LLC product or not, you will take any and all measures, including repairs by a qualified Gunsmith, required to correct such issues before loading and using your firearms.
No customer comments for the moment.