{"id":9931,"date":"2019-07-13T14:54:10","date_gmt":"2019-07-13T18:54:10","guid":{"rendered":"http:\/\/82.147.128.15\/?page_id=9931"},"modified":"2020-10-11T14:27:43","modified_gmt":"2020-10-11T18:27:43","slug":"tisas-regent-br9-critical-review-of-the-tisas-regent-br9-hp-hi-power","status":"publish","type":"page","link":"https:\/\/bhspringsolutions.com\/index.php\/tisas-regent-br9-critical-review-of-the-tisas-regent-br9-hp-hi-power\/","title":{"rendered":"Tisas Regent BR9: CRITICAL REVIEW OF THE: Tisas \/ Regent BR9 HP Hi-Power"},"content":{"rendered":"

CRITICAL REVIEW OF THE:\u00a0 Tisas \/ Regent BR9 HP Hi-Power<\/strong><\/h2>\n

\"\"<\/strong><\/p>\n

<\/h4>\n

On May 10, 2018, BHSpringSolutions performed a complete Spring Optimization and Fast Safety (SFS) conversion of the Tisas \/ Regent BR9 HP, a Turkish made Hi-Power and currently the only new Hi-Power pistols being imported into the United States.\u00a0 The Tisas that is the subject of this review was sent to the BHSpringSolutions Service Center (BHServiceSolutions), unfired.<\/p>\n

The Tisas \/ Regent Hi-Power is made in a Parkerized black finish, and a Stainless Steel model \u2013 today\u2019s subject was a Stainless model.<\/p>\n

Prior to diving into the Tisas HP and some specific observations, it can first be noted that, to date, we know of no manufacturers of the Hi-Power design that have not made an excellent product.\u00a0 It is a true statement, BHSpringSolutions LLC founders own or have owned virtually every Hi-Power and Hi-Power clone and\/or variant, and most have been extensively tested \u2013 or in the cases of models we haven\u2019t owned, we have repeatedly performed service work on all of them, giving us the opportunity to study and assess everything, down to each and every part and pin.\u00a0 We achieve highly reliable function, accuracy, and buttery smooth trigger pulls in all of them.\u00a0 The Tisas \/ Regent BR9 HP is no exception.<\/p>\n

THE TISAS \/ REGENT BR9 HP \u2013 DOWN TO THE DETAILS<\/strong><\/p>\n

Our subject Tisas HP appeared to be in New condition and unfired.\u00a0 Tisas has publicized that this HP trigger pull is 5.0 \u2013 5.5 lb break weight.\u00a0 This one came to us with an 8.0 lb Trigger Pull as measured on two different Trigger Pull Scales.\u00a0 We\u2019ve had reports from customers that their Tisas HPs arrived to them with a 10 \u2013 12+ lb Trigger pull.\u00a0 We have discovered some probably reasons for this \u2013 fortunately, the remedies are rather easy, straight-forward, and not expensive.<\/p>\n

FRAME AND SLIDE:<\/strong><\/p>\n

Inside and Outside \u2013 no shortcomings.\u00a0 Interestingly, the Grip Frame of the Tisas is the only Hi-Power Clone (Non-FN\/Browning Hi-Power) on which RDIH Tactical Shooting Grips will fit.\u00a0 Slide to Frame \u201cfit\u201d is impressive \u2013 not \u201cmatch-grade\u201d or $3,000 custom Hi Power tight, and probably not as tight as some FN\/Brownings I\u2019ve handled that were manufactured in the past 10 years, but this does not indicate any insufficiency in the Tisas \u2013 slide to frame fit in the Tisas is impressive.<\/p>\n

As clones of the FN\/Browning Hi-Power are concerned, the Frame and Slide of the Tisas appears to be identical to the FN\/Brownings.\u00a0 We found no places in the Tisas that would not accept a replacement FN\/Browning part or pin, and we found no places in the Tisas that would not accept BHSpringSolutions Optimized Hi-Power springs.\u00a0 So, this knowledge creates a good baseline and back-drop for our other observations.<\/p>\n

Tisas did a good job on the sights \u2013 three dot white sights with a slightly lower profile than on the Browning HP Mark III \u2013 good for fast sight acquisition \u2013 we still recommend replacement with Night Sights if using in any defensive role.\u00a0 Our BHServiceCenter installs a lot of Meprolight Night Sights on our customer\u2019s Hi-Powers.<\/p>\n

The barrel looked really great.\u00a0 The feed ramp is \u201cstraight\u201d, not \u201chumped\u201d, as were all Hi-Powers until around 1985.\u00a0 Feeding all ammunition through a Tisas should not be a problem.\u00a0 Barrel to Slide Lock-up and fit is fine – – – not \u201cMatch-Grade-fitted\u201d by any means.\u00a0 Compared to the FN\/Browning barrel to slide fit that we\u2019ve seen from the last 20 years of FN production, which has really been excellent\u2026.the Tisas is not quite that good\u2026but close\u2026..and certainly more than close enough for a $550 New Hi-Power.\u00a0 The Tisas HP barrel appears to be a One-Piece barrel and appears to be very well done in all respects.<\/p>\n

The single-sided, old style, nub of a safety, is a disappointment.\u00a0 This can be changed out with an FN\/Browning Ambidextrous Manual Safety or\u00a0 by installing a Hi-Power SFS Kit\u00a0, as we did.<\/p>\n

Grip Panels of the Tisas \u2013 if you do decide the nub of a manual safety needs changed out, you\u2019ll also be using different Hi-Power grips, because the stock grips on the Tisas are essentially FN\/Browning\u2019s design from 30 and + years ago, and they are not compatible with any Ambidextrous Safety.\u00a0 This is not a big loss \u2013 the slab grips of the Tisas are made like a Hi-Power is made, as compared to the grips you will see here. The difference you\u2019ll see on the BHSpringSolutions MastersGrips page is that the surface area of the grips that contact the hand is made like the hand is made (and of course the backs of the grips are made like the Hi-Power is made.\u00a0 It\u2019s the difference in grips made for a gun and grips made for a hand.\u00a0 Because we were installing SFS on this Tisas, we had to install a pair of BHMastersGrips with the RDIH Tactical Shooting Grips being the other alternative.<\/p>\n

The Tisas Frame \/ Slide and all parts such as Trigger, Extractor, Firing Pin, and all parts, are as near a carbon copy of an FN\/Browning Hi-Power as we\u2019ve ever seen.\u00a0 In all these areas, the Tisas HP deserves an \u201cA Rating\u201d \u2013 this is the good news, and it is very good news.\u00a0 That leaves only the firearms Pins and Springs, and this is where things get much more \u201cinteresting\u201d.<\/p>\n

There\u2019s an old saying that goes something like \u201cThe last 5% of the project is sometimes toughest to finish\u201d.\u00a0 Ever noticed that about a home improvement project?\u00a0 It appears that old saying may apply to the Tisas \u2013 possibly more time could have been taken in these areas.\u00a0 Following is our analysis of our findings that are noteworthy:<\/p>\n

The Hi Power\u2019s Sear Pin is a Solid Pin, not a roll pin.\u00a0 The Sear Pin of the Tisas was found to be 0.00185\u201d larger in diameter than an FN\/Browning Sear Pin yet the hole in the frame of the Tisas where the Sear Pin is installed is identical to the hole in an FN\/Browning frame.\u00a0 This made the Sear Pin fit very tight in the Tisas frame, requiring a hammer and a punch to remove (typically this pin pushes out with only a pin punch in your hand).\u00a0 This provided a small amount of resistance on the original Sear.\u00a0 When installing SFS, the SFS Return Lever would not fit on the Tisas Sear Pin at all.\u00a0 This is the first time in any model of Hi Power that we have ever seen this dimension used for a Sear Pin.\u00a0 We replaced the Tisas Sear Pin with an FN\/Browning Sear Pin, and everything fit and installed and functioned as it would in a Browning Hi Power.\u00a0 There\u2019s no way to explain what Tisas is going for with this over-sized Sear Pin, because it simply doesn\u2019t work out well.\u00a0 The Sear \/ Hammer Tooth relationship on the Tisas pistol are impressive \u2013 probably more well done and more refined than those same two parts were on any new FN\/Browning Hi Power.\u00a0 To then essentially compromise the function of those two parts with an over-sized Sear Pin is too bad.\u00a0 The good news, installing an FN\/Browning Sear Pin which is not difficult, fixes this problem.\u00a0 The over-sized Sear Pin was a contributor to the 8 lb Trigger Pull and would completely prevent installation of SFS.\u00a0 Finding this nuance in any Hi Power, is a first.<\/p>\n

Sear Lever Pin: This, is another first.\u00a0 The Sear Lever should not encounter any resistance in it\u2019s movement because of the Roll Pin that holds it in place, called the Sear Lever Pin.\u00a0 The Tisas Sear Lever was demonstrating some resistance in it\u2019s movement.\u00a0 When removed, we found the Sear Lever Pin basically \u201ccrushed\u201d down small on one end of the pin, and the other end of the pin was bulged, and the Sear Lever Pin could not pass more than half-way through the Sear Lever.\u00a0 The Sear Lever Pin of the Tisas was replaced with an FN\/Browning Sear Lever Pin and the Sear Lever then had freedom of movement that would be expected.\u00a0 Again, the installed \u201cOEM\u201d Sear Lever Pin on the Tisas was obviously an oversized pin that interferes with free movement of the Sear Lever.\u00a0 Aside from another point of unnecessary resistance on the trigger pull, a Sear Lever that does not have complete freedom of movement can present a hazardous scenario.\u00a0 A Sear Lever that doesn\u2019t work properly is one of the parts that can turn your Semi-Auto into a Hi-Power that pops off more than one round per trigger pull…..<\/p>\n

Extractor Pin: The Roll Pin that holds in the Extractor.\u00a0 This pin removed normally, we installed a BHSpringSolutions Optimized Extractor Spring that did enhance the \u201chardness\u201d of the Extractor (always a good thing on a Hi Power).\u00a0 When re-installing the Extractor Pin, we noticed that it reinstalled rather easily.\u00a0 Out of curiosity, I tried pushing the Extractor Pin back out of the slide with only my hand and a 1\/16\u201d punch tool \u2013 and it worked!\u00a0 Well, THAT does not work.\u00a0 Extractor Pins must be more secure than that \u2013 if this pin moves, much at all, during shooting, malfunctions will result because the Extractor will no longer be in the slide.\u00a0 So, so far, we\u2019ve encountered two clearly over-sized pin\u2026\u2026the Extractor Pin is a clearly under-sized pin or is just of very poor quality steel \u2013 in any event, the Tisas Extractor Pin was replaced with an FN\/Browning Extractor Pin that installed securely just they always do in an FN\/Browning Hi Power.<\/p>\n

Trigger Sub-Assembly Pins: The Solid Trigger Pin that is usually a beast to remove on an FN\/Browning Hi Power, removed almost too easily with nothing more than a standard 3\/32\u201d pin punch tool.\u00a0 The Trigger Pin reinstalled sufficiently snug that we did not replace it \u2013 if it\u2019s removed another time or two, necessary replacement is likely.\u00a0 When this pin is not sufficiently snug, we\u2019ve seen them work their way out of the pistol from right to left.\u00a0 The two smaller pins in the trigger, which are sometimes solid and sometimes roll pins depending on the manufacturer of the HP, are roll pins in the Tisas and do their jobs well.<\/p>\n

Our suggestion for Tisas owners, you\u2019ll improve your Hi Power if you just replace all the Roll Pins and Solid Pins with FN\/Browning Pins, the possible exceptions being the two Roll Pins in the trigger.<\/p>\n

\n

Springs in the Tisas:<\/strong><\/p>\n

\n

Recoil Spring \u2013 Tisas Recoil Spring is \u201cjust enough\u201d spring for it\u2019s job.\u00a0 We recommend replacement with a 17 lb BHSpringSolutions Optimized Recoil Spring for Standard Pressure Ammunition, 18.5 lb for +P Ammunition, and 15 lb for \u201clight reloads\u201d.<\/p>\n

Extractor Spring \u2013 The Tisas Extractor Spring is fine and the BHSpringSolutions Optimized HP Extractor Spring does the job better.<\/p>\n

Firing Pin Spring \u2013 Tisas has utilized a \u201cLight Firing Pin Spring\u201d.\u00a0 In the opinion of BHSpringSolutions, this spring application is inappropriate and presents an unnecessary safety hazard in the event of a muzzle drop.\u00a0 There is often misunderstanding about the function of a Hi Power or 1911 Firing Pin Spring.\u00a0 Unlike in most striker-fired handguns where the Firing Pin may propel the Firing Pin forward into the primer of the ammunition, in the Hi Power the Firing Pin Spring\u2019s function is to keep the Firing Pin rearward away from the primer.\u00a0 When the Hammer slams home into the Firing Pin, the force of the Hammer needs to be enough to overcome the resistance of the Firing Pin Spring so that the Firing Pin impacts the primer causing the bullet to be fired.\u00a0 In Hi Powers that do not contain a mechanical drop-safety (firing pin block), the FIRING PIN SPRING IS THE ONLY \u201cDROP SAFETY\u201d in the picture.\u00a0 BHSpringSolutions LLC manufactures a \u201cLight Firing Pin Spring\u201d that is included only in spring kit versions for FN\/Browning Mark III Hi Powers, and FM 95 Hi-Powers containing the Type 2 Sear Lever that also serves as a Firing Pin Block, and the Light Firing Pin Spring finds one more application in the Arcus 98 Series Hi-Power Inspired pisols.\u00a0 It is the opinion of BHSpringSolutions, which was also consistent with the Firing Pin Springs available from FN\/Browning, that Hi-Powers like the Tisas that contain no mechanical Firing Pin Block, should always contain a Heavy Firing Pin Spring.\u00a0 This discussion will continue when we discuss the Hi Power Main Spring a.k.a. \u201cHammer Spring\u201d.\u00a0 In our subject Tisas, the OEM Light Firing Pin Spring was replaced with a BHSpringSolutions Heavy Firing Pin Spring.<\/p>\n

Main Spring (Hammer Spring): The Tisas Main Spring \/ Hammer Spring seemed a lighter spring than an OEM FN\/Browning Main Spring.\u00a0 And, this is not a bad thing.\u00a0 An OEM FN\/Browning Main spring is a 32 lb spring which is like applying a ton of pressure to the Hammer \/ Sear relationship.\u00a0 BHSpringSolutions LLC manufactures the HP Main Spring in 32 lb., 30 lb., 26 lb., and 24 lb versions.\u00a0 We are assuming that since Tisas may have chosen a lighter than 32 lb Main Spring, they sought to compensate by also using a Light Firing Pin Spring.\u00a0 At BHSpringSolutions LLC, all of our testing with all of our Main Springs, even the 24 lb Main Spring, have been performed with our Heavy Firing Pin Spring, and we have never experienced a light primer strike resulting in any failures to fire.\u00a0 Our favorite in Hi Powers with the traditional operating system (non-SFS) is the BHSpringSolutions 26 lb Main Spring and always used with a Heavy Firing Pin Spring in Hi Powers like the Tisas that do not contain any mechanical drop safety provision.\u00a0 In our subject Tisas, we installed the SFS system which replaces the hammer\/hammer strut\/Main Spring.\u00a0 The SFS Main Spring is a 30 lb Main Spring.<\/p>\n

Magazine Latch and Magazine Latch Spring \u2013 This device functions fine in the Tisas.\u00a0 Device and spring appear to be FN\/Browning copies.\u00a0 In our subject Tisas, we installed the RDIH Ambidextrous Magazine Catch and it functioned perfectly.<\/p>\n

Magazine Disconnect and Magazine Disconnect Spring: The controversial device that can be in or out of any Hi Power.\u00a0 Installed, this device disables the Trigger when the ammunition magazine is not installed in the Hi Power.\u00a0 When the magazine is installed the trigger becomes active and will fire the pistol.\u00a0 When this device is removed, the Hi Power\u2019s trigger is active 100% of the time, magazine installed or not.\u00a0 The Tisas retains the Magazine Disconnect Device, and can be removed, as in all Hi Powers.\u00a0 Tisas has installed a reduced power Magazine Disconnect Spring which reduces the negative influence of the Magazine Disconnect while retaining positive influence on the positioning of the Trigger Lever.\u00a0 Some owners of the Tisas will remove the device, and some will retain it.\u00a0 Tisas has done some nice work on the Magazine Disconnect device to reduce it\u2019s negative influence \u2013 we give Tisas an A+ on their work on this part of their Hi Power.\u00a0 It is obvious that the quality of the trigger pull in the Regent BR9 was on the minds of folks at Tisas and with respect to the Magazine Disconnect device and it\u2019s spring, Tisas has done as good here as any maker has ever done.<\/p>\n

Trigger:\u00a0 The Tisas trigger is standard Hi Power trigger.\u00a0 The Tisas will benefit from a wide trigger such as this one sold at BHSpringSolutions.com<\/p>\n

Trigger Return Spring: The Tisas Trigger Return Spring sought to copy the \u201c3-Coil\u201d Trigger Return Spring design used by FN\/Browning starting approximately in 1989 in the Mark III models.\u00a0 Out of the box, the Tisas has less than optimal trigger reset.\u00a0 The Tisas trigger return spring was replaced with the BHSpringSolutions Optimized 3-Coil \u201cTarget Trigger Return Spring\u201d and the trigger reset did become more authoritative without adding resistance on the take-up or break\u2026..indicative that the BHSpringSolutions Trigger Return Spring is geometrically superior and better in the application.<\/p>\n

Manual Safety: As previously mentioned, the Tisas has the disappointing single sided nub of a safety that contains a spring.\u00a0 Everything here is a copy of FN\/Browning\u2019s nub of a Hi Power installed on pre-1989 Hi Powers.\u00a0 We know of no fans of this Manual Safety design.\u00a0 While it is more than sufficient for military applications where Condition 3 is common\u2026.in which case the manual safety is mostly a non-factor\u2026..it is not a sufficient manual safety device on a 21st<\/sup>\u00a0century firearm.<\/p>\n

Magazine: The Tisas magazine is a 13 Round Magazine and functions excellent.\u00a0 Magazine spring is sufficient.<\/p>\n

SFS Installation: After installing a dimensionally correct Sear Pin, the SFS system installed seamlessly in the Tisas.\u00a0 All functions were excellent and the unique functions of the SFS (Fast Safety) were snappy and decisive.\u00a0 Today\u2019s SFS from BHSpringSolutions contains two Sear Springs \u2013 we installed the Optimized version.\u00a0 All SFS components including the Extended SFS Slide Stop install and function flawlessly.<\/p>\n

\n

POST SERVICING RESULTS:<\/strong><\/p>\n

All reassembled, trigger break weight was measured at 6.5 lbs.\u00a0 So the trigger break weight was reduced by 1.5 lbs.\u00a0 The quality of the trigger pull was greatly improved.\u00a0 As is typical with installation of SFS and BHSpringSolutions Optimized springs, all aspects of the trigger pull improved and the break is crisp\/clean.\u00a0 It is likely that, with some shooting, the trigger break weight will reduce further as metal to metal mating surfaces \u201cself-polish\u201d.\u00a0 A 5 \u2013 6 lb trigger pull in the Tisas is certainly achievable by an Internals Polishing.<\/p>\n

FUNCTION TESTING<\/strong>:<\/p>\n

As with all work performed at BHServiceSolutions, live fire Function Testing was performed.\u00a0 We use standard pressure ammunition.\u00a0 Function was flawless with no malfunctions of any kind.\u00a0 Ejected empty brass landed in a tight group 5\u2019 \u2013 7\u2019 from the Tisas HP \u2013 PERFECT!\u00a0 Ejected shell casing distance provides excellent feedback about slide velocity.\u00a0 In the Hi Power, we\u2019re looking for ejected empty shell casings in the 4\u2019 \u2013 9\u2019 range\u2026\u2026. This result of 5\u2019 \u2013 7\u2019 is a bulls-eye!\u00a0 Accuracy was as excellent as a Hi Power should be.<\/p>\n

SUMMARY:<\/strong><\/p>\n

Overall, the Tisas\/Regent BR9 HP is a really well-done Hi Power.\u00a0 Tisas gave excellent attention to things not easily changed: slide\/frame\/barrel, and all parts \u2013 no downsides in these areas.\u00a0 This makes the Tisas an ideal platform for an excellent Hi Power \u201cbuild\u201d \/ customization.<\/p>\n

In the case of the Tisas, the devil is in the details, and the Tisas will not currently win any awards for Springs, Pins, or final quality control.\u00a0 The R&D and Quality Control folks at Tisas have not taken Springs and Pins nearly as seriously as they should \u2013 the great news is that these deficiencies are easy to upgrade and not expensive.\u00a0 All Hi-Powers can be improved with installation of BHSpringSolutions Optimized Hi Power Springs \u2013 the fact that the Tisas can be improved with the same springs was not unexpected.\u00a0 Use of a Light Firing Pin Spring, in a non-drop-safety-equipped Hi Power, was a surprise and is poor judgement and was never seen in Hi Powers made in Belgium, and would not likely ever be seen from a manufacturer of a Hi Power in the U.S., if there was one \u2013 because the potential liability factor is much too great.\u00a0 Never before however have we encountered problems with multiple pins installed by any manufacturer.\u00a0 So the need to replace pins, for cause, because they are provably either too large or too small or just too poor of quality for the application, came as a surprise.\u00a0 In the case of the Sear Lever Pin, this miss by Tisas is a serious legitimate safety concern.\u00a0 The Sear Lever on the Tisas was definitely being influenced by the Sear Lever Pin \u2013 and it is an absolute MUST that the Sear Lever NOT be influenced by an oversized Sear Lever Pin.\u00a0 All Tisas owners should inspect the Sear Lever Pin and replace if, when removed, it cannot be passed completely through the hole in the Sear Lever.<\/p>\n

Tisas owners with intentions of utilizing the Regent BR9 in any defensive role, or competition role, will seriously benefit from installing the Fast Safety (SFS) system, BHSpringSolutions Optimized Springs, a Wide Trigger, and new FN\/Browning pins.\u00a0 Tisas owners who confine use to Range and Target use, installing BHSpringSolutions Springs and FN\/Browning Pins may be sufficient, along with any other upgrades an owner may desire.<\/p>\n

As modified and serviced at BHSpringSolutions Service Center, this Tisas \/ Regent BH9 HP would now qualify as an Excellent Hi Power, well set-up for any role.\u00a0 Other modifications that could have been done but were not desired by the customer: Internals Polishing and Wide Trigger, two modifications that would bring function, in all respects, to that of any $3,500 custom Hi Power.\u00a0 Other Tactical Upgrades offered by BHSpringSolutions that could be done to the Tisas: Picatinny Rail, and Upgraded Sight installation.<\/p>\n

Click Here to read the UPDATE<\/a><\/p>\n

<\/h2>\n

\"\"<\/p>\n","protected":false},"excerpt":{"rendered":"

CRITICAL REVIEW OF THE:\u00a0 Tisas \/ Regent BR9 HP Hi-Power On May 10, 2018, BHSpringSolutions performed a complete Spring Optimization and Fast Safety (SFS) conversion of the Tisas \/ Regent BR9 HP, a Turkish made Hi-Power and currently the only new Hi-Power pistols being imported into the United States.\u00a0 The Tisas that is the subject […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"om_disable_all_campaigns":false,"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"_uf_show_specific_survey":0,"_uf_disable_surveys":false,"footnotes":""},"class_list":["post-9931","page","type-page","status-publish","hentry"],"aioseo_notices":[],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/pages\/9931","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/comments?post=9931"}],"version-history":[{"count":0,"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/pages\/9931\/revisions"}],"wp:attachment":[{"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/media?parent=9931"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}