{"id":10274,"date":"2019-07-22T15:43:42","date_gmt":"2019-07-22T19:43:42","guid":{"rendered":"http:\/\/82.147.128.15\/?page_id=10274"},"modified":"2019-07-22T15:48:15","modified_gmt":"2019-07-22T19:48:15","slug":"recoil-energy-absorbing-buffering-recoil-spring-guide-rod-assembly-literature","status":"publish","type":"page","link":"https:\/\/bhspringsolutions.com\/index.php\/recoil-energy-absorbing-buffering-recoil-spring-guide-rod-assembly-literature\/","title":{"rendered":"Recoil Energy Absorbing Buffering Recoil Spring Guide Rod Assembly – Literature"},"content":{"rendered":"

\"\"<\/h3>\n

BHPerformance Optimization<\/em><\/strong><\/h1>\n

For Full-Size\u00a0 HI-POWER\u00a0\u00a0 Pistols<\/strong><\/h1>\n

Recoil Energy Absorbing<\/strong><\/h1>\n

Buffering Recoil Spring Guide Rod Assembly<\/strong><\/h1>\n

<\/h1>\n

\u201cShock Absorber\u201d reduces recoil energy and \u201cmuzzle jump\u201d<\/strong><\/p>\n

Makes rapid, accurate fire possible!<\/strong><\/p>\n

Tunable! Includes 3 Strengths of BHSS-Recoil Buffering Springs<\/strong><\/p>\n

And users\u2019 choice of Buffering Spring does NOT require a change of recoil spring strength!<\/strong><\/p>\n

BHP<\/u><\/em>erfomance<\/em> Part:<\/strong><\/h5>\n
Enhances Shooter\u2019s Accuracy\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0Enhances Shooter\u2019s Follow-Up Efficiency (Speed)<\/strong><\/h5>\n
Enhances Shooter\u2019s Control of the Hi-Power\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 Enhances Shooter\u2019s Comfort<\/strong><\/h5>\n
Increases Shooter\u2019s Confidence\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0Extends Hi-Power Service Life<\/strong><\/h5>\n

\"\"<\/p>\n

BACK\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0BALL\u00a0 \u00a0 \u00a0BALL\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0HOUSING\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0PLUNGER \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0BUFFERING\u00a0\u00a0\u00a0\u00a0\u00a0 \u00a0\u00a0END CAP<\/p>\n

SPRING\u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0 \u00a0SPRING<\/p>\n

Hard Part Manufactured for BHSpringSolutions LLC by EFK Fire Dragon in USA<\/strong><\/p>\n

Spring Components Manufactured for BHSpringSolutions LLC in Bulgaria<\/strong><\/p>\n

Final Assembly by BHSpringSolutions LLC in USA<\/strong><\/p>\n

DESIGN PATENTED BY EFK FIRE DRAGON, MODIFIED FOR OPTIMIMAL PERFORMANCE BY BHSpringSolutions LLC<\/strong><\/p>\n

SOME FINAL ASSEMBLY REQUIRED!\u00a0 USER MUST READ AND FULLY UNDERSTAND ALL ENCLOSED INSTRUCTIONS AND SAFETY PRECAUTIONS PRIOR TO USE AND USER ASSUMES ALL RISKS ASSOCIATED WITH USE OF THIS PRODUCT OR MUST RETURN PRODUCT IMMEDIATELY TO BHSpringSolutions LLC FOR A FULL REFUND<\/strong>\u00a0<\/strong><\/p>\n

THIS COMPONENTS IS NOT FULLY ASSEMBLED AND IS NOT READY FOR USE<\/strong><\/p>\n

USER MUST READ USE GUIDELINES & INSTRUCTIONS AND COMPLETE ASSEMBLY PRIOR TO USE!<\/strong><\/p>\n

***<\/strong><\/h1>\n

SAFETY FIRST!\u00a0 THERE IS NO SUCH THING AS \u201cTOO SAFE\u201d!<\/u><\/strong><\/p>\n

FIREARMS SAFETY NOTICE AND STATEMENT OF LIMITATIONS OF LIABILITY<\/u><\/strong><\/p>\n

Firearms safety is your responsibility – always assume your firearm is loaded.\u00a0 Before handling or working on any firearm, make sure ALL ammunition is removed from the firearms and the chamber of the weapon is empty, AND remove ammunition from work area.\u00a0 Never point your firearms at anyone.\u00a0 If you are not completely comfortable with installing your BHSPRINGSOLUTIONS LLC component(s), or you have any questions concerning the safe operation of your firearm, have it serviced by a qualified Gunsmith.\u00a0 No products sold by BHSpringSolutions LLC are intended to replace periodic inspection of your firearm by a qualified Gunsmith.\u00a0 All products sold by BHSpringSolutions LLC are intended for use by qualified persons, Gunsmiths or Pistol-smiths, always over-implementing appropriate safety precautions. No liability is expressed or implied for damage or injury which may result from improper installation or use of products sold by BHSpringSolutions LLC.\u00a0 Any modifications to your firearm may void or nullify the manufacturer’s warranty.\u00a0 All products sold by BHSpringSolutions LLC are intended to always be kept out of reach of children.<\/p>\n

The owner and\/or end user of all products provided by BHSpringSolutions LLC assumes all responsibility for correct function of all aspects of the firearm in which BHSpringSolutions LLC products are installed, and firearms maintenance and\/or repair is the owner’s responsibility when necessary.\u00a0 Because firearms manufacturers production margins can vary, it is critical to test all functions, prior to use of the firearm. BHSpringSolutions LLCs advises that periodic inspection and analysis of proper function of the entire firearm, by a qualified pisolsmith or gunsmith is critical to safety & proper function of all firearms.\u00a0 Users of BHSpringSolutions LLC products accept this disclaimer of all liability on the part of BHSpringSolutions LLC, and agrees to indemnify and hold harmless BHSpringSolutions LLCs, it’s owners, associates, suppliers, its\u2019 employees, AND BHSpringSolutions LLCs\u2019 Manufacturing Partners including but not limited to EFK Fire Dragon, for any & all injury or loss that results from use of BHSpringSolutions LLC products.<\/p>\n

Immediately after installing any BHSpringSolutions LLC product in any type of firearm, with the firearm UNLOADED and without any trigger contact, actuate the firearm several times in a vigorous manner to make certain that the hammer(s), striker(s) or firing pin(s) are securely retained in the cocked position prior to let-off.\u00a0 Also, actuate the safety to determine that it is working properly.\u00a0 If during these tests, the hammer(s), striker(s), or firing pin(s) activate (release without trigger contact), or the safety does not work properly in any way, DO NOT ATTEMPT TO LOAD OR FIRE THE FIREARM until corrective repairs are made.\u00a0 If any doubts ever exist concerning the safe operation of your firearm(s), consult your local Gunsmith.<\/p>\n

NOTE:\u00a0 Always wear high-quality safety eyeglasses and other appropriate safety equipment when shooting or working with any BHSpringSolutions LLC products, to prevent injury or death.\u00a0 DO NOT use ammunition exceeding standard factory pressure levels.<\/p>\n

NOTE: The use of any aftermarket product in your firearm may limit or void the manufacturer\u2019s warranty.<\/p>\n

WARNING – Failure to follow these procedures may result in accidental discharge, firearm damage and serious bodily injury or death.<\/p>\n

ALWAYS KEEP ALL FIREARMS AND ALL PRODUCTS FROM BHSpringSolutions LLC OUT OF REACH OF CHILDREN.<\/p>\n

BHSPRINGSOLUTIONS LLC GUARANTEES ITS PRODUCTS ARE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP. IN THE EVENT OF ANY DEFECTS IN MATERIAL OR WORKMANSHIP, BHSPRINGSOLUTIONS LLC SOLE LIABILITY THEREFORE SHALL BE THE REPLACEMENT OF ANY SUCH PRODUCT(S) THAT ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP.\u00a0 THE REPLACEMENT OF ANY SUCH PRODUCT(S) SHALL BE BHSPRINGSOLUTIONS LLC SOLE RESPONSIBILITY. THIS WARRANTY SPECIFICALLY EXCLUDES ANY AND ALL CONSEQUENTIAL OR ACCIDENTAL DAMAGES.\u00a0 NO OTHER WARRANTIES OR LIABILITY WHATSOEVER, ARE EITHER EXPRESSED OR IMPLIED. IF ANY SUCH WARRANTIES SHALL BE IMPOSED BY LAW NOTWITHSTANDING THIS PROVISION, THEN SUCH WARRANTIES SHALL BE THE RESPONSIBILITY OF BHSPRINGSOLUTIONS LLC IMMEDIATE BUYER. BY WAY OF EXAMPLE, AND NOT LIMITATION, THERE SHALL BE NO WARRANTIES OF MERCHANTABILITY, USE IN TRADE, OR FITNESS FOR A PARTICULAR PURPOSE.\u00a0 BHSPRINGSOLUTIONS LLC SHALL HAVE NO LIABILITY FOR LOSS OF USE, REVENUE OR PROFIT.<\/p>\n

IMMEDIATE UNCONDITIONAL REFUND: If, for any reason, upon receiving ANY BHSpringSolutions LLC product, the Terms of this Firearms Safety Notice and Statement of Limitations of Liability are in any way not agreeable to the purchaser, purchaser may return the UNUSED product to BHSpringSolutions LLC and receive a FULL REFUND INCLUDING REFUND OF ANY SHIPPING CHARGE PAID BY PURCHASER.<\/p>\n

***<\/strong><\/h1>\n

DON\u2019T MAKE THIS MISTAKE!!! <\/u><\/strong><\/h2>\n

DAMAGE TO YOUR BUFFERING RECOIL SPRING GUIDE AND YOUR HI-POWER WILL RESULT!\u00a0 <\/u><\/strong><\/h2>\n

\"\"<\/p>\n

USE GUIDELINES & INSTRUCTIONS<\/u><\/strong><\/h2>\n

BHSpringSolutions \/ EFK Fire Dragon<\/strong><\/h2>\n

Buffering Recoil Spring Guide Rod Assembly<\/strong><\/h2>\n

DETERMINE OPTIMAL BUFFERING SPRING:<\/strong><\/h3>\n

IMPORTANT NOTE: DO NOT USE ANY OIL OR LUBRICANTS ON THE PARTS OF THE DEVICE UNTIL AFTER THESE USE GUIDELINES & INSTRUCTIONS, AND FULL ASSEMBLY, HAVE BEEN COMPLETED.\u00a0 <\/strong><\/p>\n

    \n
  1. UNLOAD A HI-POWER PISTOL AND TRIPLE CHECK THAT THERE IS NO AMMUNITION IN THE FIREARM. MAGAZINE MUST ALSO BE EMPTY.\u00a0 THERE SHOULD BE NO AMMUNITION IN THE ROOM WHEN COMPLETING THESE USE INSTRUCTIONS.<\/li>\n
  2. WITH NO MAGAZINE INSTALLED, RACK THE SLIDE USING YOUR TRADITIONAL RECOIL SPRING GUIDE ROD (NOT THE BUFFERING RECOIL SPRING GUIDE ROD). NOTE THAT WHEN THE SLIDE IS FULLY RACKED TO THE REAR, THERE IS AN AUDIBLE METAL-TO-METAL \u201cCLICK\u201d WHEN THE SLIDE ARRIVES AT ITS MAXIMUM REARWARD TRAVEL.\u00a0 THAT \u201cCLICK\u201d IS THE SLIDE \/ FRAME \u201cCOLLISION\u201d THAT WILL BE BUFFERED BY THE BUFFERING RECOIL SPRING GUIDE ROD.<\/li>\n
  3. REMOVE SLIDE FROM FIREARM. REMOVE RECOIL SPRING AND RECOIL SPRING GUIDE ROD FROM SLIDE.<\/li>\n
  4. REMOVE BUFFERING RECOIL SPRING GUIDE ROD FROM PACKAGING BAG \u2013 NOTE THAT NO BUFFERING SPRING IS PRE-INSTALLED, AND THE END CAP IS NOT PRE-INSTALLED IN THE UNIT.<\/li>\n
  5. END CAP IS SHIPPED IN THE HEAVY BUFFERING SPRING BAG. REMOVE THE HEAVY BUFFERING SPRING AND END CAP FROM HEAVY BUFFERING SPRING BAG.<\/li>\n
  6. NOTE: ALL BHSS BUFFERING SPRINGS HAVE ONE END THAT IS A \u201cCLOSED COIL\u201d (FLAT END) AND ONE END THAT IS A \u201cCUT COIL\u201d. INSTALL THE SPRING WITH CLOSED COIL END ENTERING THE HOUSING FIRST.<\/li>\n
  7. HAND-TIGHTEN THE END CAP UNTIL FULLY TIGHTENED SO THAT END CAP IS FLUSH WITH THE HOUSING. USE A 1\/8\u201d HEX-KEY IF NECESSARY.\u00a0 IT IS NOT NECESSARY TO EXCESSIVELY TIGHTEN THE END CAP AT THIS STAGE.<\/li>\n
  8. INSTALL THE BUFFERING RECOIL SPRING GUIDE ROD AND RECOIL SPRING INTO SLIDE AND ASSEMBLE SLIDE ONTO THE FRAME AND INSERT SLIDE STOP.<\/li>\n
  9. USER BUFFERING SPRING TEST \u2013 IMPORTANT, USER MUST BE ABLE TO COMPLETE A FULL SLIDE RACK AGAINST THE RESISTANCE OF THE BUFFERING SPRING. RACK THE SLIDE WITH AUTHORITY. IF USER IS CAPABLE OF ACCOMPLISHING A COMPLETE SLIDE RACK WITH THE HEAVY BUFFERING SPRING INSTALLED, THE HEAVY BUFFERING SPRING WILL BE OPTIMAL FOR THE USER.\u00a0 DON\u2019T EXPECT TO HEAR THE \u201cCLICK\u201d, OR \u201cCOLLISION\u201d OF THE SLIDE AND FRAME IN THE SAME PRONOUNCED WAY IT WAS HEARD IN STEP 2.\u00a0 THE BUFFERING SPRING EXERTS MAXIMUM RESISTANCE AT THIS \u201cCOLLISION\u201d POINT OF THE SLIDE\u2019S REARWARD TRAVEL.\u00a0 HOWEVER, A LESS PRONOUNCED AUDIBLE \u201cCLICK\u201d AT THE SLIDE\u2019S MOST REARWARD TRAVEL MUST BE ABLE TO BE HEARD, OR \u201cFELT\u201d, INDICATING USER CAN RELIABLY ACCOMPLISH A COMPLETE SLIDE RACK.<\/li>\n
  10. IF THE HEAVY BUFFERING SPRING IS TOO MUCH RESISTANCE FOR THE USER, DISASSEMBLE THE FIREARM, REMOVE THE BUFFERING RECOIL SPRING GUIDE ROD AND REPLACE THE HEAVY BUFFERING SPRING WITH THE MEDIUM BUFFERING SPRING AND REPEAT THE \u201cCLICK\u201d TEST. IF THE MEDIUM BUFFERING SPRING IS TOO MUCH RESISTANCE FOR THE USER, REPEAT THE DISASSEMBLY\u2026INSTALLING THE LIGHT BUFFERING SPRING AND REPEAT THE CLICK TEST.<\/li>\n<\/ol>\n

    IMPORTANT NOTE:<\/strong> THE INCLUSION OF 3 STRENGTHS OF BUFFERING SPRINGS SOLVES THE DOWNSIDE OF OTHER BUFFERING RECOIL SPRING GUIDE RODS CURRENTLY MADE FOR OTHER HANDGUN MODELS \u2013 IN THAT, INEVITABLY SOME USERS OF SOME SIMILAR PRODUCTS ARE UNABLE TO BENEFIT FROM RECOIL BUFFERING TECHNOLOGY WHEN HE\/SHE IS UNABLE TO COMPLETE A FULL SLIDE RACK VS. THE RESISTANCE OF THE BUFFERING SPRING.\u00a0 INCLUSION OF 3 STRENGTHS OF BUFFERING SPRINGS ALLOWS VIRTUALLY ANY USER WHO CAN ACCOMPLISH A FULL SLIDE RACK WITH A HI-POWER PISTOL WITH THE TRADITIONAL RECOIL SPRING GUIDE ROD, BY AT LEAST USING THE LIGHT BUFFERING SPRING.\u00a0 AND EVEN THE RECOIL BUFFERING EFFECT OF THE LIGHT BUFFERING SPRING IS 100% MORE BUFFERING EFFECT THAT ZERO-BUFFERING EFFECT FROM A TRADITIONAL RECOIL SPRING GUIDE ROD. \u00a0***See Supplement \u201cHistory of the Buffering Recoil Spring Guide Rod\u201d<\/p>\n

    IMPORTANT NOTE:<\/strong> USE OF A BUFFERING SPRING THAT IS TOO MUCH RESISTANCE FOR THE USERS\u2019 HAND\/ARM STRENGTH TO ACCOMPLISH COMPLETE RACKING OF THE SLIDE CAN RESULT IN A \u201cMISFEED\u201d OF THE AMMUNITION WHEN ATTEMTING TO LOAD THE FIREARM.<\/p>\n

    COMPLETE THE ASSEMBLY OF END CAP<\/p>\n

      \n
    1. ONCE USER HAS DISCOVERED THE OPTIMAL BUFFERING SPRING FOR HIS\/HER USE, IT IS TIME TO COMPLETE THE COMPONENTS\u2019 ASSEMBLY. INSTALL THE OPTIMAL BUFFERING SPRING INTO THE HOUSING, INSTALLING THE \u201cFLAT\u201d \/ \u201cCLOSED-COIL END\u201d FIRST.<\/li>\n<\/ol>\n

      IMPORTANT NOTE:<\/strong> THE THREADS OF THE END CAP REQUIRE ONE OF TWO PREPARATIONS WHEN COMPLETING FINAL ASSEMBLY \u2013 USING COMMON \u201cTHREAD-LOCK\u201d PRODUCTS \/ TECHNIQUES.<\/p>\n

      METHOD 1: (RECOMMENDED) PTFE THREAD SEAL TAPE SIMILAR TO THE PRODUCT PICTURED AND WIDELY AVAILABLE AT STORES LIKE WAL-MART, HOME DEPOT, AND ONLINE.<\/p>\n

      METHOD 2: LOCTITE BLUE 242, ALSO AVAILABLE AT WAL-MART AND HARDWARE STORES<\/p>\n

      ADVANTAGES\/DISADVANTAGES OF THE TWO METHODS: <\/strong><\/p>\n

      METHOD 1: PTFE THREAD SEAL TAPE<\/strong><\/p>\n

      \"\"<\/p>\n

      DISADVANTAGES: PTFE THREAD SEAL TAPE IS SLIGHTLY MORE DIFFICULT TO WORK WITH, AND IF USER DOES NOT WRAP THE THREADS TIGHT, AND WITH ENOUGH LAYERS OF THREAD TAPE, THE END CAP MAY UNSCREW ITSELF DURING USE.\u00a0 SUFFICIENT LAYERS OF THREAD TAPE WILL REQUIRE USER TO USE A 1\/8\u201d HEX-KEY AND SOME AUTHORITY WHEN INSTALLING THE END CAP.\u00a0 IT IS VERY IMPORTANT TO USE ENOUGH THREAD TAPE SO THAT THE RESULTING THREAD RELATIONSHIP CREATED IS VERY FIRM\/TIGHT WHEN TIGHTENING THE END CAP.\u00a0 USE 5\u201d ANGLE-NOSE PLIERS OR SIMILAR TO HOLD THE HOUSING FIRMLY WHEN INSTALLING THE END CAP<\/p>\n

      ADVANTAGES: MAKES DISASSEMBLY EASIER WHEN CHANGING BUFFERING SPRINGS, EASIER TO REMOVE FROM THE END CAP THREADS PRIOR TO REASSEMBLY<\/p>\n

      METHOD 2: LOCTITE BLUE 242<\/strong><\/p>\n

      \"\"<\/p>\n

      DISADVANTAGES: MORE DIFFICULT DISASSEMBLY EVEN THOUGH LOCTITE BLUE 242 IS DESIGNED TO BE REMOVABLE WITH TOOLS, IT WILL BE NECESSARY TO CREATE A VERY FIRM HOLD OF THE HOUSING WHEN USING A 1\/8\u201d HEX-KEY TO REMOVE THE END CAP.\u00a0 LOCKING THE HOUSING FIRMLY IN A VICE MAY BE NECESSARY.\u00a0 THREADS MUST BE ABSOLUTELY FREE OF OIL OR LUBRICANTS AT TIME OF INSTALL.<\/p>\n

      ADVANTAGES: ONE DROP OF LOCTITE BLUE 242 WILL CREATE A POSITIVE SEAL OF THE END CAP THREADS TO THE THREADS INSIDE THE HOUSING, SO LONG AS THE THREADS OF THE END CAP AND THE THREADS INSIDE THE HOUSING ARE FREE OF ANY OIL OR LUBRICANTS AT TIME OF INSTALL.<\/p>\n

      IMPORTANT NOTE:<\/strong> AFTER COMPLETING THE ASSEMBLY, IF USING METHOD 2 (LOCTITE BLUE 242 METHOD) ALLOW 24 HOURS FOR FULL CURING OF THE LOCTITE.<\/p>\n

        \n
      1. PRIOR TO USE OF THE BUFFERING RECOIL SPRING GUIDE ROD USING EITHER METHOD<\/strong>, INSTALL AND RACK THE SLIDE A MINIMUM OF 50 TIMES WITH NO MAGAZINE INSTALLED, REMOVE THE BUFFERING RECOIL SPRING GUIDE ROD AND CHECK THE TIGHTNESS OF THE END CAP. ALSO, AT THIS TIME, CHECK AND CONFIRM THE TIGHTNESS OF THE \u201cPLUNGER\u201d WHERE IT SCREWS INTO THE \u201cBACK\u201d.\u00a0 THIS CAN BE ACCOMPLISHED WITH TWO PAIRS OF ANGLE NOSE PLIERS BY ATTEMPTING TO TURN THE PLUNGER CLOCKWISE.\u00a0 WHEN THIS CHECK IS PERFORMED, THERE SHOULD BE NO CLOCKWISE MOVEMENT OF THE END CAP OR THE \u201cPLUNGER\u201d RELATIONSHIP WITH THE \u201cBACK\u201d<\/li>\n<\/ol>\n

        LUBRICATION:<\/strong><\/p>\n

        THERE ARE TWO LUBRICATION POINTS IN THE BUFFERING RECOIL SPRING GUIDE ROD ASSEMBLY.\u00a0 USE A \u201cLIGHT\u201d OR \u201cVERY LIGHT\u201d OIL ONLY AND USE ONLY ONE DROP IN EACH LOCATION AND PREFERABLY FROM A NEEDLE APPLICATOR AS SHOWN.\u00a0 ALLOW ONE DROP TO RUN DOWN BETWEEN THE HOUSING AND THE PLUNGER TO LUBRICATE THE HOUSING\/PLUNGER RELATIONSHIP AND AS A PRESERVATIVE FOR THE BUFFERING SPRING, AS SHOWN IN PICTURE #1.\u00a0 NEXT, SLIGHTLY DEPRESS THE BALL LOCATED IN THE BACK WITH A HEX-KEY, SMALL SCREWDRIVER, OR OTHER TOOL AND ALLOW ONE DROP OF OIL TO ENTER THE BACK AROUND THE BALL AS SHOWN IN PICTURE #2.\u00a0 ONE DROP OF LIGHT OR VERY LIGHT OIL BETWEEN THE HOUSING AND PLUNGER CAN BE APPLIED EACH TIME FIREARM IS CLEANED\/LUBRICATED.\u00a0 ADDITIONAL OIL APPLIED TO THE BALL, AS SHOWN IN PICTURE #2, IS ONLY NECESSARY IF DEVICE BECOMES WET BY WATER.<\/p>\n

        \"\"<\/p>\n

        TEST OF BUFFERING RECOIL SPRING GUIDE RODS\u2019 CONTROL OF THE SLIDE STOP<\/strong><\/h4>\n
          \n
        1. INSTALL BUFFERING RECOIL SPRING GUIDE ROD IN HI-POWER, ASSEMBLE SLIDE ASSEMBLY TO FRAME WITH SLIDE STOP. WITH NO MAGAZINE IN THE HI-POWER, PRESS UPWARD ON THE SLIDE STOP AS SHOWN IN ILLUSTATION #1.<\/li>\n
        2. RELEASE SLIDE STOP AND OBSERVE THE SLIDE STOP MOVE DOWNWARD SLIGHTLY AS SHOWN IN ILLUSTRAION #2.<\/li>\n
        3. INSTALL A MAGAZINE AND RACK THE SLIDE AND OBSERVE SLIDE STOPS\u2019 MOVEMENT UPWARD TO LOCK THE SLIDE STOP IN THE UP POSITION, LOCKING THE SLIDE IN THE REARWARD POSITION AS SHOWN IN ILLUSTRATION #3<\/li>\n<\/ol>\n

          \"\"<\/p>\n

          FIRST TIME TEST FIRING \/ SHOOTING W\/ BUFFERING RECOIL SPRING GUIDE ROD<\/strong><\/h4>\n
            \n
          1. WITH STANDARD (OEM) RECOIL SPRING GUIDE ROD INSTALLED, NOT THE BUFFERING RECOIL SPRING GUIDE ROD<\/u><\/strong>, SHOOT 13-15 ROUNDS \u2013 IDEALLY OBSERVING AND MEASURING THE DISTANCE OF EJECTING EMPTY SHELL CASINGS. THE OPTIMAL DISTANCE OF EJECTING EMPTY SHELL CASINGS IN THE HI-POWER IS GENERALLY 4-9 FEET FROM THE POSITION OF THE HI-POWER WHEN FIRING.\u00a0 THE BUFFERING RECOIL SPRING GUIDE ROD IS NOT A COMPENSATOR FOR AN INAPPROPRIATE RECOIL SPRING OR A RECOIL SPRING THAT HAS SURPASSED ITS\u2019 USEFUL LIFE DUE TO AGE OR USE.\u00a0 SHOOTING A MAGAZINE OF AMMUNITION WITHOUT THE BUFFERING RECOIL SPRING GUIDE ROD ALSO ESTABLISHES THE EFFECT OF NON-BUFFERED RECOIL IN THE SHOOTERS\u2019 HANDS AND ARMS.<\/li>\n
          2. DISASSEMBLE HI-POWER AND INSTALL THE BUFFERING RECOIL SPRING GUIDE ROD AND ENJOY. IF POSSIBLE, VIDEOTAPE YOUR SHOOTING AND COMPARE THE \u201cMUZZLE JUMP \/ MUZZLE FLIP\u201d USING A NON-BUFFERING GUIDE ROD COMPARED TO THE BUFFERING GUIDE ROD.<\/li>\n
          3. AFTER TWO MAGAZINES, REMOVE THE BUFFERING RECOIL SPRING GUIDE ROD AND CHECK FOR TIGHTNESS THE SECURENESS OF THE END CAP AND THE PLUNGER RELATIONSHIP TO THE BACK.<\/li>\n<\/ol>\n

            WHEN INSTALLING ANY NEW COMPONENTS IN YOUR FIREARM, COMPLETE TESTING OF FUNCTIONALITY MUST BE CONDUCTED ON EACH INDIVIDUAL WEAPON BEFORE RELYING ON IT FOR SELF-PROTECTION.\u00a0 EVERY FIREARM IS DIFFERENT.\u00a0 IF ANY FUNCTION DOES NOT APPEAR NORMAL, CONSULT YOUR GUNSMITH OR CALL BHSpringSolutions LLC at 1-877-423-BHSS.\u00a0 <\/strong><\/p>\n

            REPLACEMENT OF THE BALL SPRING PROCEDURE<\/strong><\/h4>\n

            THE BALL SPRING IN THE BUFFERING RECOIL SPRING GUIDE ROD CAN BE REPLACED.\u00a0 REPLACEMENT OF THE BALL SPRING IS NOT FREQUENT MAINTENANCE WITH THE BUFFERING RECOIL SPRING GUIDE ROD ASSEMBLY.\u00a0 IF, AT ANY TIME IN THE FUTURE, THE BUFFERING RECOIL SPRING GUIDE ROD FAILS THE \u201cTEST OF BUFFERING RECOIL SPRING GUIDE RODS\u2019 CONTROL OF THE SLIDE STOP\u201d AS DESCRIBED IN THESE USE GUIDELINES AND INSTRUCTIONS, THE BALL SPRING MAY BE PAST ITS\u2019 USEFUL LIFE AND IS REPLACEABLE.<\/p>\n

            THE PLUNGER WAS INSTALLED IN THE BACK OF THE ASSEMBLY USING ONE DROP OF RED LOCTITE 569.\u00a0 TO DISASSEMBLE, HEAT THE ASSEMBLY IN THE OVEN AT 275 DEGREES FAHRENHEIT FOR 1-2 HOURS.\u00a0 USING 2 5\u201d ANGLE NOSE PLIERS OR COMPARABLE TOOLS, THE PLUNGER CAN THEN BE UNSCREWED FROM THE BACK.\u00a0 PRIOR TO REPLACING BALL SPRING, THE PLUNGER THREADS AND THREADS INSIDE THE BACK MUST BE CLEANED OF ALL LEFT-BEHIND LOCTITE AND OIL \u2013 CLEAN THOROUGHLY!\u00a0 INSTALL NEW BALL SPRING WITH THE CLOSED COIL (FLAT) END OF THE SPRING FIRST.\u00a0 ADD ONE DROP OF LOCTITE 569 TO PLUNGER THREADS AND INSTALL.\u00a0 DO NOT APPLY ANY OIL TO THE LUBRICATION POINT AROUND THE BALL UNTIL LOCTITE HAS FULLY CURED.<\/p>\n

            ANSWERS TO SOME FREQUENTLY ASKED QUESTIONS:<\/strong><\/p>\n

            Q: Is the New Buffering Recoil Spring Guide Rod Assembly compatible with FN\/Browning .40S&W Hi-Powers?<\/p>\n

            A: Absolutely!\u00a0 The buffering action is exactly the same and will be appreciated by owners of .40S&W HP!<\/p>\n

            Q: I have a .357Sig Barrel for my Browning .40S&W Hi-Power.\u00a0 Will the New Buffering Recoil Spring Guide Rod help with the excessive muzzle jump that I experience?<\/p>\n

            A: YES!\u00a0 This scenario is probably the most needy for the New Buffering Recoil Spring Guide Rod for Hi-Power!<\/p>\n

            Q: Could the Buffering Recoil Spring Guide Rod cause excessive forward slide velocity?<\/p>\n

            A: No.\u00a0 From the point of full recoil, the Buffering Recoil Spring Guide Rod is going to contribute to forward slide velocity for only about the first 3\/8\u201d of forward slide travel, (which will produce more positive \u201cstripping\u201d of the next round from the magazine without increasing the strength of your recoil spring) and after that first 3\/8\u201d of forward slide travel, there is no difference in the influence that returns your slide to the forward battery position.<\/p>\n

            Q: Are there any known compatibility issues in ANY Hi-Power pistols from any manufacturers?<\/p>\n

            A: Only one.\u00a0 The Hi-Powers made years ago in Canada by Ingliss and the identical Ishapore 1A still made today in India at Rifle Factory Ishapore \u2013 these Hi-Powers will also require replacement of the Slide Stop (e.g. BHSS\/RDIH Extended Slide Stop for HP).\u00a0 All other Hi-Powers made in Belgium, Hungary, Isreal, Bulgaria, U.S., Germany, Turkey, just replace the OEM Recoil Spring Guide Rod with the New BHSS Buffering Recoil Spring Guide Rod and enjoy shooting with less recoil and muzzle jump!<\/p>\n

            Q: I understand that replacement of springs is normal periodic maintenance, is there a Warranty on the \u201chard parts\u201d of the New Buffering Recoil Spring Guide Rod Assembly for Hi-Power?<\/p>\n

            A: Yes. Hard Parts of the Buffering Recoil Spring Guide Rod Assembly for Hi-Power are covered by a Lifetime Warranty from BOTH BHSpringSolutions LLC and EFK Fire Dragon.<\/p>\n

            Q: Do I need to choose a different recoil spring when I use the Buffering Recoil Spring Guide Rod?<\/p>\n

            A: No \u2013 if you are using the most optimal recoil spring already, there is no need to change your recoil spring.<\/p>\n

            Q: Is there a Cure for Hi-Power Addiction?<\/p>\n

            A: Doubtful.\u00a0 And BHSpringSolutions LLC is exactly the wrong place to find this!\u00a0 \ud83d\ude0a<\/p>\n

            SUPPLEMENT: HISTORY OF THE BUFFERING RECOIL SPRING<\/strong><\/h3>\n

            Technical Aspects of Multiple Buffering Recoil Springs<\/p>\n

            The BHSpringSolutions LLC Buffering Recoil Spring Guide Rod for Hi-Power was designed in its\u2019 original form by the founder of EFK Fire Dragon.\u00a0 At the beginning of the 21st<\/sup> Century, EFK Fire Dragon discontinued the product as the Hi-Power pistol design had been falling out of popularity during the previous decade.\u00a0 EFK Fire Dragon\u2019s original design also had limitations \u2013 it was not compatible with all Hi-Powers made by all manufacturers of the Hi-Power and all Hi-Power Slide Stops.<\/p>\n

            In 2018, while discussing with EFK Fire Dragon a Next Generation Hi-Power Barrel, the EFK Fire Dragon CEO mentioned their discontinued product known as the EFK Fire Dragon \u201cDual-Action Buffer Spring System\u201d\u2026\u2026.and EFK Fire Dragon provided to BHSpringSolutions LLC a prototype of their previous product.<\/p>\n

            Upon inspection and testing of EFK Fire Dragons\u2019 \u201cDual-Action Buffer Spring System for Hi-Power\u201d, the BHSpringSolutions LLC founders found that the design had merit, in that it DID decisively \u201cBuffer\u201d the Hi-Powers\u2019 recoil impulse created by the slide\/frame collision that happens during full recoil when the slide cycles during shooting.\u00a0 BHSpringSolutions LLC also realized the limitations that the original design imposed \u2013 both in terms of compatibility with all Hi-Power models produced to date, and in terms of users with varying hand\/arm strength.<\/p>\n

            One challenge of the EFK Fire Dragon \u201cDual-Action Buffer Spring System\u201d was the devices\u2019 ability, or inability, to control all Hi-Power slide stops \u2013 the EFK Fire Dragon \u201cBall Spring\u201d was an under-powered component that was not sufficient to control Slide Stops of all the different manufacturers\u2019 slide stops.\u00a0 So, BHSpringSolutions LLC redesigned the dimensions of the some of the parts of the assembly to allow sufficient room for a Ball Spring that could do the job it needs to do.<\/p>\n

            The second challenge was EFK Fire Dragons\u2019 design of the Buffering Spring.\u00a0 EFK Fire Dragons\u2019 Original Buffer Spring is now BHSpringSolutions HEAVY Buffering Spring.\u00a0 The disadvantages of EFK Fire Dragon\u2019s Original Buffer Spring: Some users cannot complete a full slide rack, AND\u2026the springs dimensions cause the spring to \u201cbottom-out\u201d during slide recoil.\u00a0 In other words, at the slides\u2019 full recoil, the Buffer Spring is \u201csmashed\u201d into a space that is mathematically insufficient for the compressed spring.\u00a0 This \u201cdynamic\u201d has both advantages and disadvantages.\u00a0 It\u2019s good because the Heavy Buffering Spring provides maximum recoil control by using the springs\u2019 running-out-of-space as a \u201csecondary collision\u201d of the slide\/frame collision.\u00a0 During BHSpringSolutions\u2019 testing and evaluation, this dynamic never caused a malfunction or a failure of any kind \u2013 and at the same time, this dynamic is just brutal on the Heavy Buffer Springs\u2019 longevity.<\/p>\n

            So\u2026.the trade off is: Avid Users of the Heavy Buffering Spring may find themselves replacing their Buffer Spring frequently.\u00a0 And this is not an unreasonable \u201ctrade-off\u201d\u2026.sometimes absolute Optimal requires more frequent \u201cchanging of the oil\u201d (maintenance) \u2013 in this case, installation of a replacement Heavy Buffering Spring.<\/p>\n

            BHSpringSolutions LLC designed 2 additional Buffer Springs: \u201cMedium\u201d and \u201cLight\u201d.\u00a0 Both the Medium and Light Springs are based on geometry that does <\/u>compute \u2013 and as a result, users of the Buffering Recoil Spring Guide Rod Assembly that utilize the Medium or Light Buffer Spring can expect longer life from the Buffering Spring.\u00a0 The \u201cMedium\u201d Buffering Spring is only 0.04mm smaller diameter spring wire and offers approximately 90% of the slide\/frame collision buffering effect of the Heavy Buffering Spring.\u00a0 BHSpringSolutions Light Buffer Spring is 0.09mm smaller diameter than the Medium Buffer Spring and provides significantly less resistance to the slide\u2026making the Light Buffer Spring an excellent choice for users with more modest hand\/arm strength, while still providing approximately 75-80% of the buffering effect of the Heavy Buffering Spring.<\/p>\n

            RECOMMENDATION FOR FREQUENCY OF BUFFERING SPRING REPLACEMENT<\/strong><\/p>\n

            Heavy Buffering Spring Users \u2013 BHSpringSolutions LLC recommends as a \u201cbest practices approach\u201d that users of the HEAVY BUFFERING SPRING replace the Heavy Buffering Spring every 500 \u2013 750 rounds.<\/p>\n

            Medium & Light Buffering Spring Users \u2013 Because the Medium & Light Buffering Springs are completely compatible with their assigned job and the space allotted to do their job, less frequent replacement (than with the Heavy Buffering Spring) is appropriate.\u00a0 BHSpringSolutions LLC recommends as a \u201cbest practices approach\u201d that users of the Medium & Light Buffering Springs replace their Buffering Spring every 2,500 rounds.<\/p>\n

            NOTE:\u00a0 Because the BHSpringSolutions LLC Buffering Springs in the Buffering Recoil Spring Guide rod are not \u201chard compressed\u201d upon install, BHSpringSolutions LLC recommendations for replacement intervals are based on round count only and not impacted by length of time installed.<\/p>\n","protected":false},"excerpt":{"rendered":"

            BHPerformance Optimization For Full-Size\u00a0 HI-POWER\u00a0\u00a0 Pistols Recoil Energy Absorbing Buffering Recoil Spring Guide Rod Assembly \u201cShock Absorber\u201d reduces recoil energy and \u201cmuzzle jump\u201d Makes rapid, accurate fire possible! Tunable! Includes 3 Strengths of BHSS-Recoil Buffering Springs And users\u2019 choice of Buffering Spring does NOT require a change of recoil spring strength! BHPerfomance Part: Enhances Shooter\u2019s […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":0,"comment_status":"closed","ping_status":"closed","template":"","meta":{"om_disable_all_campaigns":false,"_monsterinsights_skip_tracking":false,"_monsterinsights_sitenote_active":false,"_monsterinsights_sitenote_note":"","_monsterinsights_sitenote_category":0,"_uf_show_specific_survey":0,"_uf_disable_surveys":false,"footnotes":""},"class_list":["post-10274","page","type-page","status-publish","hentry"],"aioseo_notices":[],"jetpack_sharing_enabled":true,"_links":{"self":[{"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/pages\/10274","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/comments?post=10274"}],"version-history":[{"count":0,"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/pages\/10274\/revisions"}],"wp:attachment":[{"href":"https:\/\/bhspringsolutions.com\/index.php\/wp-json\/wp\/v2\/media?parent=10274"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}