All the Recoil and Main Springs from the Range & Target Spring Kit
99 Item Items
Warning: Last items in stock!
“RANGE & TARGET” RECOIL AND MAIN SPRINGS KIT
Meets the needs of serious shooters and firearms utilized in defensive roles. Includes Recoil and Main Spring Options Primarily needed for shooting Standard Pressure and +P Ammunition. This product offers all CZ-75 platform owners maximum options for spring set-up to Optimize Reliability and Slide Velocity. Includes 5 Recoil Springs and 2 Main Springs to fine tune Slide-Cycle-Rate when shooting Standard Pressure and +P Ammunition.
Contents: (Total Springs: 7)
BHSS Recoil Springs: 20 lb., 18.5 lb., 17 lb., 15 lb., 14 lb. (OEM)
BHSS Main Springs: 20 lb. (OEM), 17.5 lb.
BHSpringSolutions LLC Optimized Recoil Springs:
BHSpringSolutions tests it’s recoil springs by mechanically cycling, 10,000 times, a representative sample of each production run. Typical result after 10,000 cycles is a loss of only 1mm of relaxed recoil spring length, and only ½ lb of resistance – remaining “fit for service” (within acceptable specs). All BHSpringSolutions Coil Springs are made with BHSS Optimized “Closing Coil” on both ends. When a Spring is expressed as, for example, a “14 lb. Recoil Spring”, this number refers to the amount of weight the spring can push from its most compressed length during the spring’s cycling operation. Another important, and seldom or never discussed important measurement of a spring’s resistance, is that spring’s resistance at it’s “maximum” length during its cycle. In the case of a Recoil Spring, that would be the spring’s resistance when the pistol’s slide is fully forward. BHSpringSolutions LLC maintains the industry’s tightest standards of consistency for Spring Dimensional Length and Resistance – assuring Optimal during the entire working cycle of each spring.
BHSS Optimized Main Springs:
The same advantages realized by BHSpringSolutions LLC Recoil Springs, are realized in the BHSS Optimized Main Springs. In the CZ-75 platform pistols, a lighter Main Spring can dramatically improve the Double Action Trigger Pull, makes the slide easier to rack, and reduces the force necessary to cycle the slide.
No customer comments for the moment.