TERMS AND CONDITIONS OF USE
PLEASE READ THE FOLLOWING TERMS AND CONDITIONS OF USE CAREFULLY BEFORE USING THIS WEBSITE. All users of this site agree that access to, and use of this site, are subject to the following terms and conditions and other applicable law. If you do not agree to these terms and conditions, please do not use this site.
This site and the materials and products on this site are provided “as is” and without warranties of any kind, whether express or implied. To the fullest extent permissible pursuant to applicable law, BHSpringSolutions LLC disclaims all warranties, express or implied, including, but not limited to, implied warranties of merchantability, use in trade and fitness for a particular purpose and non-infringement. In no event shall BHSpringSolutions LLC be liable for any special, indirect, punitive or consequential damages resulting from any use or performance of or content errors or omissions in the information, even if notified in advance of the potential for such damages. Information presented on www.BHSpringSolutions.com is used at your own risk.
USE OF INFORMATION / LIMITATION OF LIABILITY
There may also be information on this site of an instructional nature designed to inform or assist with the use or installation of our products. BHSpringSolutions LLC cannot anticipate every situation and does not imply any warranty or assume any liability for the information presented and the actions you may take as a result of viewing or reading this instructional information.
By using this site and/or with subsequent purchase of products from BHSpringSolutions LLC, you acknowledge that firearms are dangerous, their use and misuse can result in severe injuries, damages and death to you or others. You accept that it is solely your responsibility to assure that any firearm you may own, possess, handle or work on, is completely unloaded and handled in a safe and responsible manner at all times and that you hold harmless BHSpringSolutions LLC, its employees and officers, from any and all liability resulting from use of firearms.
You acknowledge that it is your responsibility to assure that your firearm(s) are functioning in a safe and reliable manner and that if not, whether you have installed a BHSpringSolutions LLC product or not, you will take any and all measures, including repairs by a qualified Gunsmith or pistolsmith, required to correct such issues before loading and using your firearms.
BHSpringSolutions.com may contain links to third party web sites. BHSpringSolutions LLC does not control the content of these web sites. Unless specifically stated on these web sites to the contrary, BHSpringSolutions LLC is not an affiliate with these third parties and does not endorse or sponsor their web sites, products or services.
BHSpringSolutions LLC assumes no responsibility and shall not be liable for any damages to, or viruses that may infect, your computer equipment or other property on account of your access to, use of, or browsing in BHSpringSolutions.com or the downloading of any materials, data, text, images, video, or audio from BHSpringSolutions.com
All right, title and interest in BHSpringSolutions.com and any content contained herein is the exclusive property of BHSpringSolutions, except as otherwise stated. The trademarks, logos, and service marks displayed on BHSpringSolutions.com are the trademarks of BHSpringSolutions LLC or their respective third-party owners. Under no circumstances may you alter, modify, or change these Trademarks. You are prohibited from using the Trademarks for any purpose.
You agree to hold harmless BHSpringSolutions LLC, its employees and officers from all claims and actions resulting from the use or misuse of products from BHSpringSolutions LLC or use of BHSpringSolutions.com, whether real or alleged or from your violation of these terms.
You acknowledge that the use of products from BHSpringSolutions LLC may affect or void or affect the manufactures warranty.
By accessing this web site, you agree that your use of this site shall be governed in all respects by the laws of the state of Indiana and the United States of America without regard to choice of law provisions and principles thereof. You also submit to the judicial jurisdiction of Indiana and/or the United States District Court.
BHSpringSolutions LLC will never sell or share your personal information in any way with an outside or third party except in the case of an official request by legitimate government agencies or subpoena from a court of competent jurisdiction.
BHSpringSolutions LLC reserves the right to cancel any order or terminate sales to any customer if we feel the purchase is in violation of the law, or in any way inappropriate.
BHSpringSolutions LLC reserves the right to amend or change the provisions of these terms at any time and you agree that, you will regularly review this page for changes. The provisions relating to Trademarks, Disclaimers, Limitation of Liability, Indemnification and Miscellaneous, shall survive any termination.
All products sold by BHSpringSolutions LLC are intended for use by qualified persons, Gunsmiths or Pistolsmiths, always over-implementing appropriate safety precautions. No liability is expressed or implied for damage or injury which may result from improper installation or use of products sold by BHSpringSolutions LLC. Any modifications to your firearm may void or nullify the manufacturer's warranty. All products sold by BHSpringSolutions LLC are intended to always be kept out of reach of children.
The owner and/or end user of all products provided by BHSpringSolutions LLC assumes all responsibility for correct function of all aspects of the firearm in which these springs are installed, and it is the owner's responsibility to replace springs when necessary. Because firearms manufacturers production margins can vary, it is critical to test all functions, prior to use of the firearm. BHSpringSolution LLCs advises that periodic inspection and analysis of proper function of the entire firearm, by a qualified pisolsmith or gunsmith is critical to safety and proper function of all firearms. Owner of these springs accepts this disclaimer of all liability on the part of BHSpringSolutionsLLC, and agrees to indemnify and hold harmless BHSpringSolution LLCs, it's owners, and/or it's employess, for any and all injury or loss that results from use of products provided by BHSpringSolutions LLC.
Firearms safety is your responsibility - always assume your firearm is loaded. Before handling or working on your gun, make sure ALL ammunition is removed and the chamber of the weapon is empty, AND remove ammunition from work area. Never point your firearms at anyone. If you are not completely comfortable with installing your BHSPRINGSOLUTIONS LLC springs or you have any questions concerning the safe operation of your firearm, have it serviced by a qualified Gunsmith. No products sold by BHSpringSolutions LLC are intended to replace periodic inspection of your firearm by a qualified Gunsmith.
CAUTIONS and INSTALLATION TEST PROCEDURES
ALWAYS BE CERTAIN THAT YOUR FIREARM IS UNLOADED BEFORE WORKING ON OR CLEANING IT. Immediately after installing any BHSpringSolutions LLC spring, or any spring, in any type of firearm that imparts power to a hammer(s), striker(s) or firing pin(s), as the case may be, with the firearm UNLOADED and without any trigger contact, actuate the firearm several times in a vigorous manner to make certain that the hammer(s), striker(s) or firing pin(s) are securely retained in the cocked position prior to let-off. Also, actuate the safety to determine that it is working properly.
If during these tests, the hammer(s), striker(s), or firing pin(s) should fail (be released without trigger contact), or the safety does not work properly, DO NOT ATTEMPT TO LOAD OR FIRE THE FIREARM until corrective repairs are made. If any doubts ever exist concerning the safe operation of your firearm(s), consult your local Gunsmith. The above procedure also applies where recoil, bolt or action springs have been installed as well as with any spring replacement.
NOTE: Always wear high-quality safety eyeglasses and other appropriate safety equipment, and over-implementing safety procedures when: shooting, installing BHSpringSolutions LLC springs, or working with any BHSpringSolutions LLC products, to prevent injury. DO NOT use ammunition exceeding standard factory pressure levels.
NOTE: The use of any aftermarket product in your firearm may limit or void the manufacturer’s warranty.
WARNING - Failure to follow these procedures may result in accidental discharge, firearm damage and serious bodily injury. Always be certain that your firearm is functioning properly before use.
WARNING - BHSpringSolutions LLC does not recommend the use of reduced-power hammer or striker springs in firearms, particularly in firearms used for critical applications such as law enforcement. Reduction of the hammer or striker spring may compromise the reliability of the firearm.
ALWAYS KEEP ALL FIREARMS AND ALL PRODUCTS FROM BHSPRINGSOLUTIONS LLC OUT OF REACH OF CHILDREN.
BHSPRINGSOLUTIONS LLC LIMITED LIABILITY AND WARRANTY
BHSPRINGSOLUTIONS LLC GUARANTEES ITS PRODUCTS ARE FREE FROM DEFECTS IN MATERIAL AND WORKMANSHIP. IN THE EVENT OF ANY DEFECTS IN MATERIAL OR WORKMANSHIP, BHSPRINGSOLUTIONS LLC SOLE LIABILITY THEREFORE SHALL BE THE REPLACEMENT OF ANY SUCH PRODUCT(S) THAT ARE DEFECTIVE IN MATERIAL OR WORKMANSHIP. THE REPLACEMENT OF ANY SUCH PRODUCT(S) SHALL BE BHSPRINGSOLUTIONS LLC SOLE RESPONSIBILITY. THIS WARRANTY SPECIFICALLY EXCLUDES ANY AND ALL CONSEQUENTIAL OR ACCIDENTAL DAMAGES. NO OTHER WARRANTIES OR LIABILITY WHATSOEVER, ARE EITHER EXPRESSED OR IMPLIED. IF ANY SUCH WARRANTIES SHALL BE IMPOSED BY LAW NOTWITHSTANDING THIS PROVISION, THEN SUCH WARRANTIES SHALL BE THE RESPONSIBILITY OF BHSPRINGSOLUTIONS LLC IMMEDIATE BUYER. BY WAY OF EXAMPLE, AND NOT LIMITATION, THERE SHALL BE NO WARRANTIES OF MERCHANTABILITY, USE IN TRADE, OR FITNESS FOR A PARTICULAR PURPOSE. BHSPRINGSOLUTIONS LLC SHALL HAVE NO LIABILITY FOR LOSS OF USE, REVENUE OR PROFIT.
BHSS ORDERING TERMS & INFORMATION
All DOMESTIC Orders to be shipped to addresses within the United States can be placed 24/7 on our website. International orders must be completed via email at BHSpringSolutions@gmail.com
Major credit cards, debit cards, and PayPal are accepted on our website.
BHSpringSolutions LLC ships via US Postal Service.
SHIPPING & HANDLING CHARGES
BHSpringSolutions LLC offers FREE Standard Shipping on all domestic orders within the United States. International orders must be completed via email at BHSpringSolutions@gmail.com and shipping charges will be calculated at time of order.
PRICING & AVAILABILITY
Prices listed our web site supersede all previously published information. Prices are subject to change without notice. BHSpringSolutions LLC reserves the right to discontinue or change specifications of any item without notice.
SHORTAGES AND ERRORS
All claims for shortage or shipment errors must be made WITHIN 10 DAYS after receipt of shipment. You will not be charged additional shipping charges due to errors on our part.
Merchandise may be exchanged within 30 days of receipt if it is UNUSED and UNOPENED in complete original packaging. You will be billed for shipping charges for the new merchandise unless exchange is due to an error on our part.
BACK - ORDERS
On rare occasions we must backorder an item which is out of stock. You will not be billed for any additional shipping charges on backorder shipments.
Orders shipping to the state of Indiana are subject to sales tax.
All products sold by BHSpringSolutions LLC are classified under Category I(h) of the United States Munitions List and are subject to the export licensing controls of the International Traffic in Arms Regulations (“ITARs”) administered by the Directorate of Defense Trade Controls of the US State Department. These export control requirements apply to any shipment of our products to the purchaser, consignee, or end user outside the United States and to any domestic purchaser in the United States who intends to export our products after purchase from BHSpringSolutions LLC.
Purchaser hereby acknowledges and agrees to fully comply with all provisions of the ITARs (including obtaining any export licenses that they may be require prior to shipment to a foreign purchaser or other party). These agency requirements apply to the ultimate disposition or export of any product purchased from BHSpringSolutions LLC as well as any products assembled, manufactured or otherwise produced by purchaser that incorporate or utilize products purchased from BHSpringSolutions LLC. Purchaser’s failure to comply with these requirements will result in the termination of any further sales to it by BHSpringSolutions LLC.
PRIVACY & SECURITY POLICY
At BHSpringSolutions LLC, the privacy and security of your personal information is always a priority. BHSpringSolutions LLC does not sell, share, or in any way distribute your personal information to anyone or any other company.
When placing an order on-line, we collect your personal information so that we can process your order. When you checkout, you are connected to our web server using SSL encryption technology. SSL technology is the stand for securing your private information between your computer and our web server. You can click on the security tab of your web browser to view and verify our certificate. Your credit card information is fully encrypted and stored using technology fully compliant with PCI (Payment Card Industry) standards. For security reasons, we recommend that you make sure you always have the latest version of your web browser.
Use of your information
BHSpringSolutions LLC uses your information internally to process your orders or requests. We will send you special emails, newsletters, and new product announcements. As with all your personal information, your email address is never shared.
Sharing of Information
BHSpringSolutions LLC does not sell or share your personal information to anyone. The only exception to this would be as a result of an official investigation by a legitimate law enforcement agency or subpoena from the courts.
This security policy is subject to change without notice.
BHSpringSolutions LLC offers trade discounts to businesses that are engaged in the firearms or sporting goods trade. In order to receive dealer pricing, you must have an established dealer account with BHSpringSolutions LLC. Contact us at: BHSpringSolutions@gmail.com
To verify that you are a legitimate business, we require a copy of your state sales tax certificate be emailed to us. When approved, we will setup a dealer account and enable dealer pricing for you.
We are required to collect sales tax for all orders shipped to Indiana. If you are an Indiana business, we must have a copy of your sales tax exemption certificate on file if you do not wish to be charged sales tax.
LAW ENFORCEMENT, GOVERNMENT AGENCIES
BHSpringSolutions LLC is committed to supporting law enforcement. Healthy and correct springs are a key to firearms reliability, accuracy, and safety.
If your department has special needs or requirements involving any handgun, we will work with you in providing spring solutions and support.
Law Enforcement and/or Government Agency orders are not supported by our website, and inquiries should be initiated through BHSpringSolutions@gmail.com
Agency orders will be accepted on official department letterhead only.